Adaptar el control del Xbox a la Pc [Tutorial]

Well as I promised in an earlier post this I will show you how to make an adapter on the pc xbox

Do not do if they are unsure of being able to do yourself

We need:

A black Xbox controller (the first came out)

A sharp knife

Duct tape (black) are not as they say in other countries but in Mexico and is known

USB Cable serves any

Optional: soldering iron, solder, soldering paste

Let's begin:

First we need to have the piece that connects to the console and cut the longer side and

Attention: stop 4-5 cm to make the mooring cables then peel the black, red, yellow, green and white are not going to use for anything

Then cut the USB cable with a 10 or 20 cms

And again stripping wires red, black, white and green and join now:

Obcional: can solder the cables or you can join with a rat tail (turning to cables that link and join)

Green Green

Red to red

White White

Black with black

After isolate them with electrical tape, it is important that the wires do not touch, we isolated cable cable and they are all united and isolated can put tape around the wires to make it more difficult to separate and go and have our adapter Xbox control.

I repeat do not do it if they are unsure of what to do if you have any questions ask

Read the comments of others to see if they worked or not

Now install the driver to play with the Xbox control on the PC model

If we connect the Windows command will realize it, but will not know what their function. For Windows recognizes it perfectly and we can use it without problems, so I leave the program for you to download the controller driver xbox drivers are valid for systems 98/2000/XP.

If by some chance we had already previously installed other drivers on the Xbox, we will have to uninstall before continuing with the new facility.

Step 1. Connect the controller to PC
Step 2. Run the file (driver) download

Step 3. Press "Yes" and continue with the installation process.
Step 4. Disconnect command and reconnect it to the PC. Now Windows should detect the name XBCD Xbox Gamepad.

use "Next" or "Next" and probably Windows (XP) will show a warning that the driver is not digitally signed. ignore this warning and continue to complete successfully. This is the final look of the driver:

Now we have all the steps to play with.

End of tutorial

I repeat: just ask any questions before doing so and read the comments

I'll answer and thanks for the visit my post

remember this post was echo

To see my contributions please click on the image